$1,499.99
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Find out why our hand dryers are hygienic.
Two 0.45mm curved apertures create 624km/h⁶ blades of air that follow the contours of your hands, removing more water, in less time.
The HEPA filter captures 99.97% of particles,⁴ including bacteria and viruses, from the air.
Acoustically engineered to minimize washroom noise.
Switch between two power modes. Max mode for busy areas of high footfall or Eco mode for energy-efficiency and acoustic control.
Our powerful digital motor spins at 75,000 rpm to shift 23 litres of air per second,⁶ for a 10-second¹ dry time in Max mode.
The Dyson Airblade 9kJ hand dryer produces up to 88% less CO₂ emissions⁷ than single-use paper towels and costs up to 99% less to run.³ Creating a better environment in your restrooms and the world outside.
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
4.5kg
10 seconds² (Max mode) / 12 seconds² (Eco mode)
900w (Max mode) / 650w (Eco mode)
5,000 per second (Max mode) / 4,533 per second (Eco mode)
Up to 75,000 rpm
79db(A) (Max mode) / 77db(A) (Eco mode)
23 l/s (Max mode) / 20 l/s (Eco mode) (LV)
100-127v (LV) 200-240v (HV)
50-60hz
0°C-40°C
30 seconds
99.97% of particles4, including bacteria and viruses
Yes
500 mm
450 mm
100 mm
/specifications-and-docs/Hand-Dryers_Airblade280_S-D_Product-card.jpg?$responsive$)
The power mode can be set at installation of the product to either Max or Eco mode. Max mode operates at 900W and delivers a 10-second dry time, perfect for high footfall environments. Eco mode, operating at 650W, delivers a 12-second dry time but uses only 9.1kJ of energy per dry and is better suited for locations such as offices. The power mode can be altered following install but would need removal from the wall to do so as the switch is not accessible externally.
To ensure the machine performs to its best and remains hygienic, the Dyson Airblade 9kJ hand dryer should be cleaned daily. Please refer to the cleaning guide for further information.
Backplates are recommended for use on plasterboard and cavity walls. They can also be used when replacing other Dyson Airblade™ hand dryers.
