Maintain your vacuum filter. Extend its life.
Dyson cordless vacuum filters are engineered to capture microscopic particles. Over time, these can build up in the filter and reduce performance. By washing it at least once a month, you can help maintain suction power.
Five-layer filtration
All our cordless vacuums use at least five layers of advanced, whole-machine filtration to trap 99.99% of dust and bacteria as small as 0.3 microns. Expelling cleaner air than the air you breathe.‡
Every machine is tested to ensure it’s fully sealed, so it traps dust and dirt inside and expels cleaner air into your home.
Easy step-by-step guide on how to clean your vacuum filter
We engineer vacuums that are simple to use and easy to look after. We suggest you clean your filter at least once a month to keep your machine running at maximum efficiency.
-
1. Remove your Dyson filter(s)
Remove your filter(s) from your Dyson machine.
-
2. Remove excess dust
Tap your filter(s) lightly on the side of the sink or in the bin, to remove any loose dust and debris.
-
3. Rinse filter(s)
Wash your filter with cold tap water – gently rubbing it with your hands.
Don't use detergents. -
4. Give it a firm shake
Fill your filter(s) with warm tap water. Cover the open ends with your hands and shake firmly to remove the dirt. Repeat until the water runs clear and then firmly shake the filter to remove all excess water.
-
5. Leave to dry for 24+ hours
After washing your filter(s), leave to dry for at least 24 hours in an area with plenty of airflow, such as beside a fan or open window. Your filter(s) must be completely dry before you put it back into the machine, or it could damage the motor. Be sure to physically check for moisture with a touch test before reinstalling the filter
Don't dry in a tumble dryer, microwave or near a naked flame.
Watch the video for filter cleaning tips
Select your machine from the list below to see how to clean your specific vacuum filter.
‡In boost mode. All other modes achieve at least 99.97% filtration.
