Using your machine
Two power modes
Toggle between Powerful mode – for longer suction – and MAX mode, for stronger suction. Just hold down the trigger and slide the control back and forth.
Switch accessories quickly
The Quick-Release tools click into place, and release in moments by simply depressing the release switch.
Don't overfill it
To maintain suction, keep an eye on the bin and empty it as soon as debris reaches the MAX marker.
Secure the charging dock
Leave at least 1.2m between the floor and the lowest screw point. Make sure it's within easy reach of a power socket so the cable has some slack.
Wash the filter regularly
Rinse under a cold tap until the water runs clear – you don't need any detergents. Squeeze out excess water and leave to dry on its side (at least 24 hours) before refitting.
Clean awkward spaces
Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.
Maintaining your machine
Washing the Soft roller
Learn how to wash the Soft roller head supplied with your Dyson vacuum.
Checking for blockages - fluffy head
Follow our step-by-step guide to check for blockages.
Resetting the brush bar
The brush bar is designed to shut off when jammed. Learn how to reset it after removing the cause of the jam.
Frequently asked questions
How often does the filter on this machine need washing?
We recommend that you clean the filter at least once a month. You can find filter maintenance instructions in the machine's User Guide.
Can I use this machine with an extension cable?
No, the use of an extension cable is not recommended.