Click or press Enter to skip navigation.
Ce site est disponible en français.  Cliquez ici pour changer de langue.
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson Hot+Cool™ Fan Heater (White/Silver)

Let's get your machine working.

See all steps

Please select the appropriate option

Do not use polish or detergent on any part of the machine.

Cleaning required

The following areas should be checked and cleaned to maintain the machine's performance.

  • Loop amplifier - clean with a dry or damp cloth.
  • Main body - clean with a dry cloth
  • Shroud - clean with a dry cloth or soft brush

WARNING: Do not use polish or detergent on any part of the machine.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Has this resolved the problem?

How to replace the battery in the remote

Unscrew the remote control's battery compartment.

Image showing how to remove the battery.

Loosen the base and pull it away from the remote.

Replace the battery with type CR 2032.

Has this resolved the problem?

Run heater at highest temperature

The heating elements turn on one at a time and so this is to be expected when the machine first turns on.

Run the heater for 1 minute at the highest temperature setting.

Has this resolved the issue?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Paper test

Turn the airflow control to maximum.

Hold a sheet of newspaper approximately 3 meters (10') away from the product.

The paper should lift beyond 45 degrees.

Does the newspaper lift beyond 45 degrees?

Please follow steps in the video.

Has checking the loop amplifier and shroud resolved the problem?

WARNING: Do not use polish or detergent on any part of the machine.

Check and clean machine

Loop amplifier - clean with a dry or damp cloth.

Shroud - clean with a dry cloth or soft brush

Try the paper test again.

Has checking the loop amplifier and shroud resolved the problem?

Target temperature

The temperature set on the machine is the target temperature of the room, not the temperature of the fan.

The temperature from the fan when in heating mode will not change.

Has this resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Enable cooling mode

Unlike the AM04/AM05 the AM09 does not need to be set to 0°C to enable cooling mode.

Turn the machine on.

To turn the heater off and use cool air mode press the BLUE Thermostat Control button. The power button light on the main body will change from red to blue.

Change the airflow speed using the Airflow Speed Control.

NB: The fan speed setting is between 1-10.

Has using the blue thermostat button and changing the airflow resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Retry machine at 37°C

On first use, the heater will default to a temperature 1°C higher than the current room temperature.

Thereafter, the heater will remember the last target temperature set.

The heater will not operate unless the target temperature is above the room temperature.

Please retry the machine at temperature setting 37 degrees.

Press the red thermostat control button until the digital display on the main body shows 37 degrees.

The power button will turn red for heating mode.

Each time heating mode is selected the machine conducts a short calibration cycle, during this the airflow will be automatically controlled, once the cycle is complete it will revert to the selected airflow speed.

Has changing the temperature to 37°C resolved the issue?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Oscillation range

The machine should oscillate within 70 degrees from one side to another.

Does the machine oscillate outside of this range?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Has this resolved the issue?

Oscillation speed

The machine should take approximately 4 seconds to oscillate from one side to the other.

Does the machine oscillate outside of this speed?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Normal oscillation speed

The oscillating speed is normal.

Has this resolved the issue?

Checking oscillation

The AM09 has a one touch smooth oscillation action.

When in oscillation mode the machine will temporarily stop oscillating when any of the control buttons are pressed.

If the oscillation doesn't work carry out the following checks:

Check the six feet on the base of the main body are present and clean.

(If the heater is placed on a low friction surface, e.g. highly polished or oily, the main body may slide)

Switch the heater on. Press the oscillation button.

Check the other remote functions are working and that the battery has not run out.

Try a 'Hard reset'. Unplug the machine at the wall and leave for two minutes before plugging back in.

If the other functions are not working send a new remote.

If the oscillation action is still not working arrange an exchange.

Has this resolved the issue?

Check remote

Check if the other functions on the remote are working.

If the remote control is not working but the button on the machine is, please select 'Remote control not working'.

Has this resolved the issue?

Check remote is being used correctly

Please ensure that the remote is facing the correct way and has a clear line of sight to the base of the machine.

Has pointing the remote at the machine without obstructions resolved the issue?

Replacing remote control battery

Unscrew the remote control battery lid.

Has reinserting the battery resolved the issue?

Test remote

Squeeze on the remote control below the buttons and operate one of the functions.

Has squeezing the remote resolved the issue?

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Camera test

The remote LED is invisible to the human eye, only a digital camera can show this is working.

Using a digital phone or camera, aim the LED at the lens and see if a red light shines through it.

NB: This check will not work for iPhone 5s or 6.

Does the LED show through the camera screen?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Move obstructions

Please retry the remote with the machine again, ensuring no obstructions.

Does the remote control work?

Replace battery

Please replace the battery in the remote and call back if the problem persists.

Please select the appropriate option

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Replace batteries

Replace the battery in the remote control and call back if the problem persists.

Replace the battery with type CR 20

Please select the appropriate option

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Test airflow

Switch the machine on using the remote control or button on the main body.

Press the airflow control button (2) at the top and bottom, whilst testing the airflow.

NB: The display will show 10 after the product has reached maximum, or 0 for minimum airflow.

If the airflow control is still not working this issue can be resolved by arranging a return to base repair.

Has this resolved the issue?

Check the other functions on the remote

On/Off

Cool air mode

Airflow speed control

Temperature control

Sleep timer function

Oscillation On/Off

Personal heating mode

Diffused heating mode

Do the other functions on the remote work?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Replace batteries

Unscrew the remote control's battery compartment.

Loosen the base and pull it away from the remote.

Replace the battery with type CR 20

Has changing the battery resolved the problem?

Replacement remote required

This issue could be resolved by ordering a replacement remote control.

Has the remote been replaced before?

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Intermittent power

If the machine has been constantly heating for 9 hours, please select yes.

Has the machine been switched on for 9 hours, or more?

More than 9 hours

Dyson fan heaters and hot and cool purifiers have a positive safety feature where the machine deliberately switches off after 9 hours of continuous heating.

If you would like to continue using the machine after 9 hours, you will need to turn the machine back on by using either the power button on the remote control or main body.

Has this resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Turn machine off

Please turn the machine off and back on again.

Has turning the machine off and on resolved the issue?

Check feet

The AM09 has a one touch, smooth oscillation action. When in oscillation mode, the product will temporarily stop oscillating when any of the control buttons are pressed. If the oscillation action doesn’t work carry out the following checks.

Check the six feet on the main body are present and clean. (If the heater is placed on a low friction surface, e.g. highly polished or oily, the main body may slide.)

Check remote

Switch the heater ON.

Press the oscillation button.

Check the other remote functions are working and that the battery has not run out.

Try a ‘Hard reset’.

If other functions are not working order a new remote.

Has this resolved the issue?

Has checking the power resolved the issue?

Change target temperature

The machine will do this if the previously entered temperature is below the current room temperature and above 32F.

Please change the target temperature to 32F and retry the machine.

Use the buttons on the machine, not the remote control. To use as a heater please select a temperature above the current room temperature.

If only the remote isn't working, please select the 'Remote control not working' from the drop down list.

Has changing the temperature setting resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which C code is displaying?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which F code is displaying?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Which H code is displaying?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Reset machine

The display will show a fault code and the LED around the power button will flash red.

The oscillation, airflow, and timer controls will be locked out on the remote.

The power button on both the remote and main body will still work.

To reset the appliance, turn the power off (using either the power button on the remote or the main body) wait 60 seconds and then turn the machine back on.

The fault code should have cleared.

If the power cycle does not work try a 'hard reset'.

Turn the power off and unplug the machine, or switch off at the mains socket, for 30 seconds and then turn back on.

The fault code should have cleared.

Has this resolved the issue?

Idle mode

The AM09 will switch into idle mode once the target temperature is reached, idle mode means the motor is running at a lower rate than when in use to keep air flow moving over the thermostat so that the machine knows when to switch the heating mode back on.

If you are near the machine they may feel a draft coming from the machine when it is in idle mode.

Has this resolved the problem?

Please select the appropriate option

Airflow speed

To change the airflow speed press the airflow control button.

The digital display will show the new speed; after 3 seconds it will change back to the target temperature.

Diffused heating mode

Press the wide angle button to change from personal heating to whole room heating.

Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.

Heating and cool modes work in this mode.

Personal heating mode

Press the narrow angle button to change from whole room heating to personal heating.

Heating and cool modes work in this mode.

Has this resolved the problem?

Assembling machine

Lower the main body onto the base, aligning the arrows.

Turn the base clockwise until it clicks into place.

The remote magnetically attaches to the top of the loop amplifier.

Has this resolved the problem?

Has this resolved the problem?

Has this resolved the problem?

Serial number location

The serial number can be found on the rating plate on the base of the machine.

Has this resolved the problem?

Using sleep timer

To set the sleep timer, press and hold the timer button to select the desired time.

When time reaches zero, the appliance will go into standby mode.

To cancel, reduce the time until two dashes appear.

Has this resolved the problem?

You might need a replacement part.

It looks like the Base is not working. You can solve this by ordering a new one below.

Base

Part no. 966534-02

Replacement base for your Dyson fan heater.

$32.99

Base

Base

Part no. 966534-02

Replacement base for your Dyson fan heater.

$32.99

$32.99

$32.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 966538-01

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Does the machine have power?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Do not plug in or attempt to use the machine if the power cord is damaged.

Check the electrics

Check that the household electrics are on.

Image showing the machine being unplugged from the wall.

Check the plug and power cord for signs of damage.

Try the machine in a different plug socket.

Has this resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

A red light indicates the heater is in use. The machine is working as expected.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Machine is working

This is normal and the machine is working as expected.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Machine is working normally

This is completely normal.

The machine will run very slowly when in idle mode to keep air flowing over the thermostat so it can constantly regulate the temperature of the air.

This is a characteristic of the product and cannot be resolved with an exchange or return to base repair.

There is no safety concern.

If the noise is intrusive, switching the machine off at the wall will stop the noise, or altering the position of the product in the room might make the noise less audible.

Has this resolved the problem?

Is this the first time the machine is being used?

Do not use detergents or polishes.

Checking the loop amplifier and shroud

Check the air inlet holes and loop amplifier for blockages and remove as necessary.

Use a soft brush to remove any debris.

To clean, wipe with a dry or damp cloth.

Has checking the loop amplifier and shroud resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the loop amplifier and shroud

Ensure all packaging, including plastic sleeve, have been removed.

Check the air inlet holes and loop amplifier for blockages and remove as necessary. Use a soft brush to remove any debris. To clean, wipe with a dry or damp cloth.

WARNING: Do not use detergents or polishes.

Has checking the loop amplifier and shroud resolved the problem?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Is this the first time the machine is being used?

Do not use detergents or polishes.

Checking the loop amplifier and shroud

Check the air inlet holes and loop amplifier for blockages and remove as necessary.

Use a soft brush to remove any debris.

To clean, wipe with a dry or damp cloth.

Has checking the loop amplifier and shroud resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the loop amplifier and shroud

Ensure all packaging, including plastic sleeve, have been removed.

Check the air inlet holes and loop amplifier for blockages and remove as necessary.

Use a soft brush to remove any debris. To clean, wipe with a dry or damp cloth. Do not use detergents or polishes.

Has checking the loop amplifier and shroud resolved the problem?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Do not plug in or attempt to use the machine in this condition

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent