Click or press Enter to skip navigation.
Ce site est disponible en français.  Cliquez ici pour changer de langue.
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson AM05 Fan Heater (Nickel/Nickel)

Let's get your machine working.

See all steps

The heater is fitted with automatic cut-out switches that operate if the heater tips over or overheats. If the cut-out operates, unplug the heater and allow it to cool.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Hard reset

Unplug the machine and leave it for 10 seconds.

Has this resolved the problem?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Hard reset

Unplug the machine and leave it for 10 seconds.

Plug the machine back in and retest.

Has this resolved the problem?

Ensure the correct button on remote is being pressed

Point the remote directly at the front of the machine while pressing the button.

Has this resolved the problem?

Hard reset

Unplug the machine and leave it for 10 seconds.

Plug the machine back in and retest.

Has this resolved the problem?

Ensure the correct button on remote is being pressed

Point the remote directly at the front of the machine while pressing the button.

1) On/Off

2) Oscillation

3) Airflow speed

4) Temperature control

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check and clean machine

Clean the loop and base

Check for blockages and remove as necessary.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Machine is working

This is normal and the machine is working as expected.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Machine is working normally

This is completely normal.

The machine will run very slowly when in idle mode to keep air flowing over the thermostat so it can constantly regulate the temperature of the air.

There is no safety concern.

If the noise is intrusive, switching the machine off at the wall will stop the noise, or altering the position of the product in the room might make the noise less audible.

If pressed, it should be stated that the noise is caused by some of the electrical components emitting a frequency which can sometimes be heard as an electrical humming noise. This is not specific to Dyson products.

Has this resolved the problem?

Your machine may be hot to the touch if it has been used as a heater in the last couple of hours. Please do not touch the sides of the loop amplifier until it has cooled.

Ensure the correct button on remote is being pressed

1) On/Off

2) Oscillation

3) Airflow speed

4) Temperature control

Has this resolved the problem?

Select a different option on the remote

Point the remote directly at the front of the machine while pressing a different option.

Do the controls on the remote itself work?

Test the remote buttons

Airflow can be set by the airflow buttons on the remote.

Airflow can also be set on the machine. Use the middle control toggle to adjust the speed of the airflow.

Do the other functions on the machine work?

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 922662-09

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 922662-09

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Paper test

The fan has a strong, smooth airflow when switched on. The airflow should be strong enough to lift a sheet of newspaper past 45 degrees.

Hold a newspaper approximately 2 meters (6' 6'') away from the product with the airflow control dial turned to maximum.

Does the newspaper lift beyond 45 degrees?

Do not use polish or detergent on any part of the machine.

Wipe the machine

The following areas should be checked and cleaned to maintain the machine's performance.

Main body

Loop amplifier

Has this resolved the problem?

The heating elements turn on one at a time and so this is to be expected when the machine first turns on.

Run the heater for 1 minute at the highest temperature setting.

Has this resolved the problem?

Retry machine at 32°F/0°C

On first use, the heater will default to a temperature 1°C/33°F higher than the current room temperature.

Thereafter, the heater will remember the last target temperature set.

The heater will not operate unless the target temperature is above the room temperature.

Please retry the machine at temperature setting 37°C/99°F.

The heater will not operate unless the target temperature is above the room temperature, or the target temperature is set to 32°F/ 0°C for cooling.

Please retry the machine at temperature setting 32°F/ 0°C.

Has this resolved the problem?

Retry machine at 37°C/99°F

On first use, the heater will default to a temperature 1°C/33°F higher than the current room temperature.

Thereafter, the heater will remember the last target temperature set.

The heater will not operate unless the target temperature is above the room temperature.

Please retry the machine at temperature setting 37°C/99°F.

Image showing the machine emitting cool air at 0 degrees and warm air at 19 degrees.

Has this resolved the problem?

Test oscillation

Before switching on, please make sure the fan is positioned so that the airflow or oscillation is not obstructed.

Check the feet are attached correctly

Ensure all the feet are attached to the base of the machine.

Place the fan on a flat, non-slip surface.

Has this resolved the problem?

Select a different option on the remote

Point the remote directly at the front of the machine while pressing a different option.

Test the other buttons on the remote

1) On/Off

2) Oscillation

3) Airflow speed

4) Temperature control

Has this resolved the problem?

Change the remote battery

Push the remote control's battery compartment.

Loosen the base and pull it away from the remote. Replace the battery with type CR 2032.

Has this resolved the problem?

Test the buttons on the front of the machine.

Do the buttons on the machine work?

Ensure the correct button on remote is being pressed

1) On/Off

2) Oscillation

3) Airflow speed

4) Temperature control

Has this resolved the problem?

Check the bottom of the base unit has not come away, there will be a visible gap.

If there is a visible gap, press firmly down on the loop amplifier until the base clicks into place.

Has this resolved the problem?

Target temperature explanation

The temperature set on the machine is the target temperature of the room, not the temperature of the fan.

The temperature from the fan when in heating mode will not change.

Has this resolved the problem?

Please select the appropriate option

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Test the remote buttons

Point the remote directly at the front of the machine while pressing the button.

Image showing removing the remote from the magnetic top of the loop.

Has this resolved the problem?

Has this resolved the problem?

This issue can occur if the machine is running and the power is cut e.g. plug pulled out, power cut etc.

Unplug the machine for at least 5 seconds or until the LED goes out.

Plug the machine back in and retest.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Remote control is not working. You can solve this by ordering a new one below.

Remote control

Part no. 922662-09

Replacement remote control for your Dyson fan heater.

$22.99

Remote control

Remote control

Part no. 922662-09

Replacement remote control for your Dyson fan heater.

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

How to tilt the machine

Place the machine on a flat, stable surface.

Tilt the loop amplifier forwards slightly.

The loop should stay in the position it was left in.

Has this resolved the problem?

Where to clean your machine

The following areas should be checked and cleaned to maintain the machine's performance.

  • Loop amplifier - clean with a dry or damp cloth.
  • Main body - clean with a dry cloth
  • Shroud - clean with a dry cloth or soft brush

Do not use polish or detergent on any part of the machine.

Is there anything else we can help with?

Replace the remote control battery

Please follow the steps in the video.

Is there anything else we can help with?

Replace the remote control battery

Turn off power and unplug the machine.

Push the base of the remote.

The battery compartment will open and you will be able to pull it out.

Replace battery (type CR 2032) and reinsert the compartment until you hear a click.

Image showing how to remove the battery from the remote.

Is there anything else we can help you with?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Your machine may be hot to the touch if it has been used as a heater in the last couple of hours. Please do not touch the sides of the loop amplifier until it has cooled.

Serial number location

The serial number can be found on the base of the machine.

Image showing where to locate the serial number.

Is there anything else we can help you with?

User guide

Please open the PDF for the user guide.

Is there anything else we can help you with?

Quick start guide

Watch the simple video below for an easy guide to getting started with your new Dyson heater.

The model shown may vary from the product selected but the process remains the same.

If you are unable to view the video or prefer to follow a step by step guide choose the appropriate option.

Is there anything else we can help you with?

Assembling your machine

NB: Before switching on, please make sure the heater is positioned so that the airflow or oscillation is not obstructed.

Align the black arrows located on the base and Main body of the machine.

Image showing remote magnetically held on top of the machine.

Please follow the next step.

How to change the airflow speed

To change the airflow speed press the airflow control button.

The digital display will show the new speed; after 3 seconds it will change back to the target temperature.

Please follow the next step.

How to tilt

Carefully hold the base and top of the loop amplifier. Tilt forward or backwards for the required airflow angle.

Please follow the next step.

Heating modes

For heating in a single spot, select a low flow of air.

For heating a whole room, select a high flow of air. For best results turn on the oscillation control.

Assembling your machine

NB: Before switching on, please make sure the heater is positioned so that the airflow or oscillation is not obstructed.

Align the black arrows located on the base and Main body of the machine.

Twist the machine clockwise until it locks, as shown below. The remote control docks magnetically on the top of the heater as shown.

Image showing how to fit the main body to the base.

Please follow the next step.

How to use your heater

Plug the heater in and switch ON at the wall.

NB: Before switching on, please make sure the heater is positioned so that the airflow or oscillation is not obstructed.

Image showing warning sign regarding use.

Ensure that the machine is placed on a stable solid surface. Turn the machine on using the ON/OFF button on the machine.

NB: On first use, the heater will default to a temperature 1°C higher than the current room temperature. Thereafter, the heater will remember the last target temperature set.