Click or press Enter to skip navigation.
Ce site est disponible en français.  Cliquez ici pour changer de langue.
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson DC21 Stowaway

Let's get your machine working.

See all steps

For GB&I markets only - Dyson machines are built to last. However, since October 2018 we are unfortunately no longer able to supply spare parts, carry out services or repairs for DC20, DC21, DC22, DC23, DC23T2 and DC27 machines.

Clean the bin and cyclone

Turn off and unplug the machine.

Press the release catch on the cyclone and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Separate the clear bin and cyclone top by pressing the bin catch on the cyclone top.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Empty the contents of the bin into a plastic bin bag or dustbin.

Image shows the bin being emptied into a bin.

You can wash the clear bin with water only.

WARNING: Do not use any detergent or chemicals.

Ensure the clear bin is completely dry before fitting back to the cyclone.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector.

WARNING: Do not get any part of the cyclone damp or wet.

Image showing checks up the bottom of the cyclone and base of the clear plastic bin for any blockages/damage.

Is there anything else we can help you with?

Maintaining your Dyson machine

Check the bin and cyclone

The rattling noise may be caused by debris in the clear bin or cyclone.

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Separate the clear bin and cyclone top by pressing the bin catch on the cyclone top.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Empty the contents of the clear bin into a plastic bin bag or dustbin.

Shake or tap the cyclone firmly to remove all dust from inside the fine dust collector.

Image shows the bin being emptied into a bin.

Rebuild and test the machine.

Is the noise still present?

Check hose inlet

The rattling noise may be cause by a blockage in the machine, therefore the following blockage checks should be carried out.

Remove the hose from the hose inlet on the front of the machine.

Image shows removal of the hose.

Place your hand over the hose inlet and test the suction.

Image showing checks up the hose inlet for blockages.

Is the suction strong or weaker than usual?

Check hose and Wand

Ensure that the Wand is fully extended.

Unclip the hose from the hose inlet.

Check along the length of the hose and Wand for blockages and remove as necessary.

Image showing you to look down the extension tube, wand handle and hose for blockages.

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check Power floor tool

Please follow the steps in the video.

Check power to floor tool

Turn off power and unplug the machine.

Check the openings on the power floor tool for a blockage and remove if necessary.

Undo the end cap soleplate fasteners at each end of the power floor tool with a coin.

Rotate the end caps and remove them from the power floor tool.

Pull out both brush bar sections and ensure that the brush housing is clear from blockages.

If necessary, carefully use a pair of scissors to cut away any hair and fibers from the Brush bar.

Replace both Brush bar sections and fasten the end caps.

Reassemble and test machine.

Has checking the floor tool resolved the problem?

If any parts are missing or damaged select 'part broken'.

Check duct, bin and cyclone

Switch off and unplug the machine.

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Check the duct

Check the seals located on the hose inlet and exhaust pipe are not missing or damaged.

Check the hose inlet and exhaust pipe for any blockages and remove as necessary.

Image shows to check the ducts behind the bin for blockages.

Check the cyclone top and bin entry for blockages and remove as necessary.

Image shows to check the back of the cyclone for blockages, including the bin inlet and duct.

Push the button on top of the cyclone to open the bin lid, being careful to ensure dust is captured.

Shake or tap firmly to remove all dust from inside the fine dust collector.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Release the clear bin from the cyclone by pressing the button on the back of the cyclone.

Image shows the bin being emptied into a bin.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector. Check the cyclone and bin seals are not missing or damaged.

Image showing checks up the bottom of the cyclone and base of the clear plastic bin for any blockages/damage.

Reassemble and test machine.

Has checking the duct, bin and cyclone resolved the problem?

Wash the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Has washing the filter resolved the problem?

Wash the filter

Turn off power and unplug the machine.

To remove the washable filter: press the release catch on the cyclone and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Do not try to lift the cyclone assembly away from the machine until you have fully pressed the release catch as this will lock the cyclone assembly to the machine.

Lift the filter release catch and remove the filter from the machine.

Image showing how to remove the filter from the machine.

Wash the filter in cold water only.

WARNING: Please do not use detergent, do not wash in a dishwasher or washing machine.

Image showing the filter being washed under a cold tap.

Leave to dry in a warm place until filter completely dry.

WARNING: Do not dry in a tumble dryer, microwave, oven or near an open flame.

Image showing you to leave the filter to dry for 24 hours.

Replace the filter as shown.

Has washing the filter resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

If any parts are missing or damaged select 'part broken'.

Check duct, bin and cyclone

Turn off power and unplug the machine.

Press the release catch on the cyclone and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Check the duct:

Check the seals located on the hose inlet and exhaust pipe are not missing or damaged.

Check the hose inlet and exhaust pipe for any blockages and remove as necessary.

Image shows to check the ducts behind the bin for blockages.

Check the cyclone top and bin entry for blockages and remove as necessary.

Image shows to check the back of the cyclone for blockages, including the bin inlet and duct.

Separate the clear bin and cyclone top by pressing the bin catch on the cyclone top.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Empty the contents of the bin into a plastic bin bag or dustbin.

Image shows the bin being emptied into a bin.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector. Check the cyclone and bin seals are not missing or damaged.

Image showing checks up the bottom of the cyclone and base of the clear plastic bin for any blockages/damage.

Reassemble and test the machine.

Has checking the duct, bin and cyclone resolved the problem?

Check hose and Wand

Ensure that the Wand is fully extended.

Unclip the hose from the hose inlet.

Check along the length of the hose and Wand for blockages and remove as necessary.

Image showing you to look down the extension tube, wand handle and hose for blockages.

Check Power floor tool

Check the openings on the power floor tool for a blockage and remove if necessary.

Undo the end cap soleplate fasteners at each end of the power floor tool with a coin.

Rotate the end caps and remove them from the power floor tool.

Pull out both brush bar sections and ensure that the brush housing is clear from blockages.

If necessary, carefully use a pair of scissors to cut away any hair and fibers from the Brush bar.

Replace both Brush bar sections and fasten the end caps.

Reassemble and test the machine.

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check hose inlet

If your machine is making a whistling noise, this indicates that there is a blockage or a damaged or missing seal.

Remove the hose from the hose inlet and the front of the machine.

Image shows removal of the hose.

Place your hand over the hose inlet and test the suction.

Image showing checks up the hose inlet for blockages.

Is the suction strong or weaker than normal?

Please ensure the correct button is being pressed.

Remove the power floor tool and test the machine.

Image shows the floor tool being removed from the extension tube.

Is the noise still present?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check Power floor tool

Please follow the steps in the video.

Has checking the Power floor tool resolved the problem?

Check Power floor tool

Turn off power and unplug the machine.

Check the openings on the power floor tool for a blockage and remove if necessary.

Undo the end cap soleplate fasteners at each end of the power floor tool with a coin.

Rotate the end caps and remove them from the power floor tool.

Pull out both brush bar sections and ensure that the brush housing is clear from blockages.

If necessary, carefully use a pair of scissors to cut away any hair and fibers from the Brush bar.

Replace both Brush bar sections and fasten the end caps.

Reassemble and test the machine.

Has checking the Power floor tool resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the Dual mode floor tool

Check the base and connector of the Dual mode floor tool for blockages and remove as necessary.

Test the Dual mode floor tool on the machine.

Has checking the floor tool resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Switch off and unplug the machine.

Check duct, bin and cyclone

Press the release catch on the cyclone and remove the cyclone and clear bin from the machine.

Check the duct

Check the seals located on the hose inlet and exhaust pipe are not missing or damaged.

Check the hose inlet and exhaust pipe for any blockages and remove as necessary.

Check the cyclone top and bin entry for blockages and remove as necessary.

Push the button on top of the cyclone to open the bin lid, being careful to ensure dust is captured.

Shake or tap firmly to remove all dust from inside the fine dust collector.

Release the clear bin from the cyclone by pressing the button on the back of the cyclone.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector. Check the cyclone and bin seals are not missing or damaged.

If any parts are missing or damaged choose part broken to place an order.

Retest the machine.

Has this resolved the problem?

Turn off and unplug the machine

Wash the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Has washing the filter resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Wash the filter

Turn off and unplug the machine.

Lay the machine on its side, and turn the filter release catch in front of the wheel 360° until it clicks.

Open the filter housing and remove the filter.

Wash the filter in cold water only.

WARNING: Please do not use detergent, do not wash in a dishwasher or washing machine.

Leave the filter to dry in a warm place for 24 hours, until completely dry.

Do not dry the filter in a tumble dryer, microwave, oven or near a naked flame.

Replace the filter.

The filter should be washed every 3-6 months.

Has washing the filter resolved the problem?

Please keep your hands and fingers away from the Brush bar when completing this test.

Does the Brush bar spin with the power on?

With the power floor tool attached to the telescopic wand, plug the machine in and turn the power on, making sure to keep all body parts and clothing away from the Brush bar.

Look through the clear top section of the power floor tool.

Is the Brush bar operating correctly?

Check hose inlet

Remove the hose from the hose inlet on the front of the machine.

Image shows removal of the hose.

Place your hand over the hose inlet and test the suction.

Image showing checks up the hose inlet for blockages.

Is the suction strong or weaker than usual?

Turn off and unplug the machine

Check Power floor tool

Please follow the steps in the video.

Turn off and unplug the machine

Check power floor tool

Check the openings on the power floor tool for a blockage and remove as necessary.

Undo the end cap soleplate fasteners at each end of the power floor tool with a coin.

Rotate the end caps and remove them from the power floor tool.

Pull out both brush bar sections and ensure that the brush housing is clear from blockages.

If necessary, carefully use a pair of scissors to cut away any hair and fibers from the Brush bar.

Replace both Brush bar sections and fasten the end caps.

Reassemble and test the machine.

If the connections on the power floor tool, telescopic wand or hose are damaged, select the 'part broken' option.

Check the power floor tool connections

Turn off and unplug the machine.

Separate the power floor tool from the telescopic wand by pressing the release catch on the neck of the power floor tool.

Check that the metal connection pins on the power floor tool and the connector on the telescopic wand are not damaged.

Unclip the hose from the hose inlet on the machine.

Check that the metal connection pins on the hose are not damaged.

Connect the hose to the hose inlet ensuring it ''clicks'' into place and retest the machine.

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Has checking the Motorhead resolved the problem?

Check hose inlet

Remove the hose from the hose inlet and the front of the machine.

Place your hand over the hose inlet and test the suction.

Is the suction strong or weaker than usual?

Check hose and Wand

Ensure that the Wand is fully extended.

Unclip the hose from the hose inlet.

Check along the length of the hose and Wand for blockages and remove as necessary.

Image showing you to look down the extension tube, wand handle and hose for blockages.

If any parts are missing or damaged select 'part broken'.

Check duct, bin and cyclone

Turn off power and unplug the machine.

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Check the duct:

Check the seals located on the hose inlet and exhaust pipe are not missing or damaged.

Check the hose inlet and exhaust pipe for any blockages and remove as necessary.

Image shows to check the ducts behind the bin for blockages.

Check the cyclone top and bin entry for blockages and remove as necessary.

Image shows to check the back of the cyclone for blockages, including the bin inlet and duct.

Separate the clear bin and cyclone top by pressing the bin catch on the cyclone top.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Empty the contents of the bin into a plastic bin bag or dustbin.

Image shows the bin being emptied into a bin.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector. Check the cyclone and bin seals are not missing or damaged.

Image showing checks up the bottom of the cyclone and base of the clear plastic bin for any blockages/damage.

Reassemble and test the machine.

Has checking the duct, bin and cyclone resolved the problem?

Check hose and Wand

Ensure that the Wand is fully extended.

Unclip the hose from the hose inlet.

Check along the length of the hose and Wand for blockages and remove as necessary.

Image showing you to look down the extension tube, wand handle and hose for blockages.

Check Power floor tool

Please follow the steps in the video.

Check Power floor tool

Turn off power and unplug the machine.

Check the openings on the power floor tool for a blockage and remove if necessary.

Undo the end cap soleplate fasteners at each end of the power floor tool with a coin.

Rotate the end caps and remove them from the power floor tool.

Pull out both brush bar sections and ensure that the brush housing is clear from blockages.

If necessary, carefully use a pair of scissors to cut away any hair and fibers from the Brush bar.

Replace both Brush bar sections and fasten the end caps.

Reassemble and test the machine.

If the connections on the power floor tool, telescopic wand or hose are damaged, select the 'part broken' option.

Check the power floor tool connections

Turn off power and unplug the machine.

Separate the power floor tool from the telescopic wand by pressing the release catch on the neck of the power floor tool.

Check that the metal connection pins on the power floor tool and the connector on the telescopic wand are not damaged.

Image showing you to look down the cleaner head, extension tube, wand handle and hose for blockages.

Unclip the hose from the hose inlet on the machine.

Check that the metal connection pins on the hose are not damaged.

Connect the hose to the hose inlet ensuring it ''clicks'' into place and retest the machine.

Check the Mini turbine head

Undo the fastener with a coin.

Image showing you turning the end cap anti-clockwise to unlock it.

Remove the Brush bar from the Mini turbine head.

Image showing clearing debris from the brush bar.

Clear any hair, threads and debris from the Brush bar. Inspect the duct on the underside of the Turbine head for blockages and remove if necessary.

Refit the Brush bar and fasten the Mini turbine head fastener with a coin.

Test the Mini turbine head on the machine.

Image shows the brush bar being refit into the cleaner head.

<p>Turn the airflow control knob to full lock in a clockwise and then anti-clockwise direction, whilst testing the airflow.</p>

Mini turbine head

The Mini turbine head will work if the suction is strong. This issue can be resolved by carrying out performance checks or washing the filter.

Maintaining your Dyson machine

The filter should be washed every three to six months. The post-motor filter located under the clear bin should last the lifetime of the machine and does not need to be washed. Please do not remove this filter.

Wash the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Has washing the filter resolved the problem?

Check hose inlet

Remove the hose from the hose inlet and the front of the machine.

Image shows removal of the hose.

Place your hand over the hose inlet and test the suction.

Image showing checks up the hose inlet for blockages.

Is the suction strong or weaker than usual?

When did the machine last have power?

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Change the (13 amp) fuse.

<p>Reassure the customer that a Service Engineer will inspect their machine.</p>

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

If the customer prefers to check the machine when the power has returned, wait for a minimum of 2 hours and ask them to call back.

The filter should be washed every three to six months. The post-motor filter located under the clear bin should last the lifetime of the machine and does not need to be washed. Please do not remove this filter.

Wash the filter

Please follow the steps in the video to wash the filter.

The filter should be washed every three to six months. The post-motor filter located under the clear bin should last the lifetime of the machine and does not need to be washed. Please do not remove this filter.

Wash the filter

Turn off power and unplug the machine.

To remove the washable filter: press the release catch on the cyclone and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Do not try to lift the cyclone assembly away from the machine until you have fully pressed the release catch as this will lock the cyclone assembly to the machine.

Lift the filter release catch and remove the filter from the machine.

Image showing how to remove the filter from the machine.

Wash the filter in cold water only. Please do not use detergent on the filter, or wash the filter in a dishwasher or in a washing machine.

Image showing the filter being washed under a cold tap.

Leave to dry in a warm place for 12-24 hours. Do not dry the filter in a tumble dryer, microwave, oven or near a naked flame.

Image showing you to leave the filter to dry for 24 hours.

Refit the filter.

How to use your Dyson machine

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

The switch does not light up.

Press the switch

Press the rear of the switch to make sure it stays in the on position.

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Wash the filter and clean the bin and cyclone

This issue can be resolved by washing the filter and cleaning the bin and cyclone.

Clean the bin and cyclone

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Open the bin lid by pressing the red button on top of the cyclone, be careful to do this somewhere to capture any dust securely.

Image shows the bin being emptied into a bin.

Release the clear bin from the cyclone by pressing the button on the back of the cyclone.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

You can wash the clear bin with water only, do not use any detergent or chemicals. Ensure the clear bin is completely dry before fitting back to the cyclone.

Clean the cyclone with a dry cloth and shake or tap firmly to remove all dust from inside the fine dust collector. Do not get any part of the cyclone damp or wet.

Image showing checks up the bottom of the cyclone and base of the clear plastic bin for any blockages/damage.

Has cleaning the bin and cyclone resolved the problem?

Using the cable

Turn off and unplug the machine.

If the cable does not rewind, firmly pull it out and fully extend it until the red tape is visible.

The cord rewind button needs to be pressed down firmly to retract the cord for storage after use. When the button is pressed down far enough you should feel and hear a click, and the cord will retract.

Has this resolved the problem?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check hose inlet

If your machine is spitting out dust, this indicates that there is a blockage.

Remove the hose from the hose inlet and the front of the machine.

Image shows removal of the hose.

Place your hand over the hose inlet and test the suction.

Image showing checks up the hose inlet for blockages.

Is the suction strong or weaker than usual?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 1-877-397-6622

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

How to adjust airflow

Turn the airflow control dial clockwise to full lock, to give maximum airflow.

How to use your Dyson machine

Locating the serial number

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

The serial number is on the Main body of your machine, behind the clear bin.

Image shows the serial number on the underside of the machine.

Is there anything else we can help you with?

How to store and carry your Dyson machine

Collapse the telescopic wand and wrap the hose around the machine.

Image showing how to carry the machine.

Locate the telescopic wand into the wand storage clip on the side of the cyclone top.

Image showing the hose and wand being wrapped around the cyclone and secured in place.

Attach the floor tool to the parking yoke on the rear of the vacuum cleaner.

Image shows the floor tool being attached onto the back of the machine.

To lift the machine use the carrying handle on the cyclone top only, not the handle on the clear bin.

Image showing the machine being carried safely.

For your safety, do not press the cyclone release catch when carrying your machine.

How to use your Dyson machine

Using the accessories

Attach the accessory tools to the wand ensuring they 'click' into place.

Image showing different tools attaching to the extension tube.

How to use your Dyson machine

Using the power floor tool on different floor types

The Brush bar will reset to ''ON'' each time you start the machine and put it in the cleaning position.

Press the pedal on the top of the power floor tool to switch the Brush bar off for use on hard/delicate flooring.

Image showing how to adjust the turbine head.

Press the pedal again to re-start the Brush bar for vacuuming carpets.

How to use your Dyson machine

Empty the bin

Turn off power and unplug the machine.

Press the release catch on the cyclone assembly and remove the cyclone and clear bin from the machine.

Image shows how to release the bin from the machine.

Separate the clear bin and cyclone top by pressing the bin catch on the cyclone top.

Image showing how to empty the bin, by pressing the yellow catch on the front of the bin and removing it.

Empty the contents of the bin into a plastic bin bag or dustbin.

Image shows the bin being emptied into a bin.

Shake or tap the cyclone firmly to remove all dust from inside the fine dust collector.

How to use your Dyson machine