Getting started
Connecting your machine
The Dyson Link app allows you to personalise light for your time of day, task and location. Follow the steps below to connect your light to the app:
Download the Dyson Link app.¹
-
Connect to your Dyson Lightcycle™ task light via Bluetooth®.
-
Follow the simple prompts to add your location. This will enable your light to synchronise with local daylight.
-
-
Using the Dyson Link app
Open the Dyson Link app and select your light to access all available features. When our engineers develop new software, your light will automatically update via the app. If you'd prefer to be notified of updates, go to settings > software in the app to turn off automatic updates.
Useful tips
-
Manually adjusting brightness/temperature
Swipe the slide-touch buttons on your light to adjust the brightness or colour temperature. Tap the buttons to quickly change between levels.
-
Auto-adjusting brightness
When auto-adjust is switched on, the light automatically adjusts to changes in background light – keeping your workspace at a constant brightness.
-
Positioning the light
You can precisely position your light with a gentle touch of the arm – vertically, horizontally, and through 360°.
-
Reversing the arm direction
Detach the arm, flip and then re-insert it to quickly change the direction your light is facing.
-
Turning on the movement sensor
Pressing the movement sensor button means your light will turn on when presence is detected, and off when you're away for two minutes.
-
Re-syncing with local daylight
Use the re-sync button to automatically adjust brightness and colour according to your location. Your light needs to be connected to the Dyson Link app via Bluetooth®.
-
Frequently asked questions
Can I start using the light before connecting to the Dyson Link app?Yes, but the light cannot track your local daylight until you connect to the app.
Do I need to let the heat pipe cool down before reversing the arm direction?No, the copper heat pipe is cool enough to touch at all times.
Will I need to buy replacement LEDs for this light?No, the LEDs are designed to last for decades² and can't be replaced.
Accessories and replacement parts
-
Currently out of stock.
$122.99
-
Currently out of stock.
$122.99
The Dyson warranty
¹The Dyson Link app requires iOS 10 or Android 5.0 and above.
²LED-life calculation is based on L70 measurement according to IEC 62717, with an estimation of 8 hours’ usage per day. Real-life results may vary.